Pre-treatment Concentrate

  • Using a clean, lint-free cloth or paper towel wipe surface (Note: surface may feel slightly sticky) and allow to dry.

  • Wipe dust and dirt from surface and clean surface with warm soapy water for best results.

  • In a ventilated area, add 1 part pre-cleaner with 10 parts water into a plastic sprayer, replace top and shake 3-5 times (Note: This is not necessary if Pre-Treatment is pre-mixed.)

  • Apply Pre-Treatment evenly to surface and let set for 5-10 seconds.

  • DO NOT TOUCH pre-treated surface (Note: please repeat this step if surface is touched after completing).

Trusheen Surface Treatment

A one-time application, permanent treatment that gives any non porous surface a non-stick, water repellant, impervious coating that resists soiling,  oil contamination, discoloration and general deterioration of the treated surfaces.

  • Apply TruSheen treatment evenly to surface.

  • Using a clean, lint-free cloth or paper towel, lightly buff surface steadily increase the pressure until the entire treated surface is visibly clear (Note: surface will begin to feel smooth)

  • Allow treatment to cure on surface for 16-18 hours (Note: cure longer for best results)